Roof Replacements: No margin for error

I am sure that you have read or heard about roofing projects. You are familiar with the terminology (FRTP, Ice Damming, Ice and Water Shield, Required Venting, etc.). Perhaps your Association has spent several hundred thousand or even over a million dollars on roofing improvements and/or replacements within the last few years.

Roofing has been a topic of conversation among thousands of people who live in community associations since the occurrence of two events: the failure of fire retardant treated plywood and severe ice damming.

Roof Replacement Responsibility

A roof replacement project is probably the most important reconstruction project that an association will encounter during the first twenty (20) to thirty (30) years of its existence. As with any reconstruction project, the work should be undertaken and completed with the highest quality final work product and with minimal inconvenience to the community. The professional is responsible for preparing a suitable, cost effective design and construction specifications for the proposed improvement. Each roof system has individual elements that require special attention. A generic design or specification does not exist and making use of such a mechanism may, and often does, result in problems and increased costs, be it immediate or future.

Future Problems

Future problems may go unseen for years but become huge burdens to an association at a later date. Efficient, individualized designs and specifications with qualified inspections reduce the possibility for undesirable circumstances. Problems are now arising from deficient roof replacement projects completed in the early nineties. This is unfortunate and could have easily been avoided.

Important Aspects to Consider

There are several very important aspects of a roof replacement project that must be followed to ensure the association is receiving a quality work product and workmanship. Failure to achieve these results can be detrimental to the new roof system and may result in added expenses to the Association over time. Professional firms that offer consulting services regarding roofing issues should be knowledgeable about multifamily roof systems and the short and long-term problems that must be eliminated by qualified design and inspection. Such services include preparation of contracts and specifications, management of the construction process, and construction inspection services. If your Community is embarking on a roof replacement project, you should confirm that your professional provides, at minimum, the following services:

  • Verify that the specifications that will be prepared are individualized to your community. There will be many similarities in the specifications for any community; however, each community has specific requirements. It is important to know that you are getting a roof system that is going to meet all of the warranties for the new materials installed. If the warranties are not met, you may have failure of new fire retardant materials from moisture, failure of shingles from heat build up in the attic, or ice damming due to inadequate ventilation. Each community and each building type should be addressed individually. Flashing details, ice shield and venting requirements will vary significantly with each building type.

  • Failure of proper venting, flashing, or waterproofing may void the shingle manufacturer warranty and may cause premature degradation of the shingles or sheathing and future leaks. The leaks and degradation may occur when the contractor and professional are no longer available to rectify them. These issues should be properly addressed at the time of the replacement so they will not be a future problem.
  • Don't be afraid to ask the design professional why certain materials were specified over others. There are dozens of material variations to be considered in preparing a specification. Each condition should have a material specified that will best serve that condition a material should not be specified simply because that material is usually specified.
  • Even the shingle manufacturer, shingle type, and installation procedures should be individually analyzed per project. Shingles have different qualities that may make one product superior to another depending upon the time of year applied, pitch of the roof, and other existing site and building conditions, not to mention price. What may be the best material for one project is not necessarily the best for another.

    Such attention to detail in the design phase will ensure optimum performance and useful life of the roof system.

  • Make sure that a professional is inspecting the work with qualified inspectors at all times and at roof level. Variations in original construction practices often require field decisions to be made at roof level. These decisions need to be made by qualified personnel.
  • There are many very qualified roofing contractors, however, in mass production construction efforts, mistakes are made, and sub-contracting crews are used. These crews are usually compensated by the main contractor by the quantity (number of squares) they complete each day. This being the case, it is essential to ensure that no short cuts are being taken. If each area is not inspected these deficiencies will go unnoticed because the roof system is closed and the potential problem is covered up. Years later, problems may start to appear and remediation of these problems is many times very costly.
  • Qualified inspection also means that the inspector(s) are not overwhelmed with increased production of the contractor. The inspector can only thoroughly observe a limited amount of construction. Rapid work production (greater then fifty (50) or even seventy-five (75) squares per day per inspector) is an unacceptable practice. The inspector cannot possibly ensure that all work is being performed in accordance with the specifications if there are increased roof areas being replaced. Limited daily production or increased qualified inspection is needed to ensure the roofs are reconstructed in full accordance with the specifications on all buildings or units. Failure to comply with the specifications on even one unit is not acceptable, especially if it is your unit that is leaking three (3) years after the completion of the work.
  • A problem or leak during and after the roof project may occur. Immediate response to these problems should be expected. Twenty-four (24) hour availability should be expected from the professional and contractor for any problem that occurs during or after the work. Securing the site each day is essential. No roof should be opened if rain is imminent and absolutely no roof should be left open over night. The site should be cleaned and secured to 100% at the close of each day. Resident safety and convenience is essential for these types of projects. Limited production and/or proper inspection will ease this concern.

Fire Retardant

If your Association was constructed without Fire Retardant Treated Plywood (FRTP) you may be preparing to replace or recover your roofs as they approach the end of their useful lives. The above issues are just as important.

Such attention to detail is not standard for residential roofing because a repair or retrofit on a single home can be more easily and inexpensively made. However, try to ask someone to assume responsibility for the same mistake or problem repeated 500 times and there will be a different retort. Roof replacement projects are one of the most important reconstruction projects that an association will encounter. Attention to detail is paramount to provide a roof system that will be completely effective for its full useful life.

(As published in Community Trends magazine.)

Source: Association Times
Search All Articles
Related Articles
Caution: Bully on Board
Bully_word_imageDo you have a bully on your HOA board? The kind of person whose presence is hard to endure.
Nobody Wants to Be the Board Treasurer - What Do You Do?
768px-green_tick.svgThe most important board role and the one with the most work is the Treasurer.
Money Tips for Young People
TaxespreadsmFinancial matters can seem complicated as a Millennial.
Are You Prepared for a Blizzard?
Blizzard2017 saw some of the most extreme weather in years

More...
Most Popular
HOA: Five Best Practices
BestHelp your homeowners association run more smoothly with these tips.
7 Steps To Manage Your Money When You Have Kids
KidsmoneysmAdding a bundle of joy to the family makes actively managing your finances even more important. Follow these seven steps to hel
5 Signs It's Time to Vote Off a Board Member
BoardYou, and probably the rest of the board, is thinking the same thing: Is it time to vote them off?
Your 401(K) And Index Funds
FundLearn more about index funds to determine if they should be part of your 401k investment portfolio.

More...

Zip Code Profiler

Neighborhoods, Home Values, Schools, City & State Data, Sex Offender Lists, more.

Instant Home Value!